Wiser PowerTag Energy - energy meter PT R9 3P+N

Wiser is a smart home system that cost-effectively and easily enhances home comfort, security, and energy efficiency. The Wiser smart home consists of various devices that can be controlled wirelessly in different ways. With the Wiser phone app, you can create convenient scene controls, schedules, or, for example, automations based on weather changes. The devices also communicate with each other, so home functions can be automated to occur without user attention.

PowerTag Energy is a wirelessly communicating energy sensor designed for energy management in both new and renovated buildings. Together with the Wiser hub, PowerTag Energy monitors real-time energy consumption in the home up to 63A. The device can be installed in the electrical panel in just minutes.

When wirelessly connected to the Wiser system, PowerTag enables additional features such as electricity market price tracking and the use of automations (available Q3/2023).

Wiser automation conditions can also use PowerTag's measurements:
- Load status (on/off)
- Instantaneous total power (W)
- Daily consumption (over X kWh)
- Monthly consumption (over X kWh)

Frequency: 50Hz
Voltage (3 phase): 380...415 V AC
Maximum current: 63A
Operating temperature: -25°C...60°C
Overvoltage protection (IEC 61010-1): Class III
Measurement category (IEC 61010-2-30): Class III
Measurement accuracy (IEC 61557-12): Class 1
Protection class: IP20, IK05
Radio frequency: 2.4GHz...2.4835GHz
Shortest communication interval: 5s

Full use of Schneider Electric's Wiser system requires a hub (CCT501901, Matter-certified), the Wiser by SE smartphone app, a user account, and an internet connection. Use of the system is free of charge. The device is intended for indoor use.

It is recommended to install one PowerTag in the application, which is displayed as "Electricity Grid" - a meter of total household consumption. Other PowerTags can be added under this to measure other groups.