Swim & Fun Pump w/Timer 250W pool filter pump

High-tech pump with integrated timer. 250 Watt circulation pump that can handle filter systems for swimming pools of up to 22,500 litres. The pump is recommended for smaller free-standing garden pools, hot tubs and pools. The pump can circulate bathing water with both chlorine and salt disinfection and can work with water up to +35°c.

Integrated Timer
With the integrated timer it is easy to keep the pool water properly circulated, without you even needing to remember to turn the filter system on and off each time. The timer is set to the desired operation cycle and then it turns itself on and off. Simply select the number of hours the pump must run within a 24-hour period. The pump will circulate water continuously for the number of hours you have selected, and will then remain on standby for the remainder of the period. The pump starts again at the same time the next day.

The timer has a battery backup, which ensures that your settings will be saved in the event of a power failure. If an outage occurs, the pump will start again the following day, when the power is restored.

Technical specifications
Article number; 1861
Pump capacity; 7,500 litres per hour
Effective cleaning capacity at 0.4 bar; 4,500 litres per hour
HP; 0.3
Maximum pool volume litres; 22,500 litres
Pump power W/kW; 250 Watt/0.25 kW
Qmax; 125 l/min
Hmax; 7.5 metres
Power supply; 220 - 230 volt / 50 Hz
Hose connection; Ø32/38 mm
Sound level dB: 65-70
IP classification; IPx5
Integrated timer; Yes
EAN; 5704841018617

Qmax: The maximum number of litres of water the pump can move when the pump is located at the same level as the water (Hmax= 0).
Hmax: The maximum height the pump can push water up vertically at a pressure of 0.0 bar (at the same level).