Accu Thermo Type 14

Accu Thermo Type 14 is a modern power supply source for heated dive wear. Simplicity, intuitive operation and performance reliability; up to 200 Watts heating power. The charging port of ACCU THERMO may be optionally applied to connect any of Ammonite System lamp head.
 
Every Accu Thermo heating battery head contains two power outputs. One, secured with a protective plug, can supply an umbilical light and charge battery pack. Second- E/O cord is made to power heating gear only. 

Outputs differ in voltage, so misusing it may lead to damage to your equipment!

LED indicator – information on the battery level, intelligent E/O – an electronic circuit protecting the contacts of a wet connector from damage; Intelligent E/O “knows” when a cable is disconnected and when to cut off voltage, as well as when to bring back power supply after reconnecting. LED indicator – information on the battery level, intelligent E/O – an electronic circuit protecting the contacts of a wet connector from damage; Intelligent E/O “knows” when a cable is disconnected and when to cut off voltage, as well as when to bring back power supply after reconnecting.

The compact size casing all made of high grade hard anodised aluminium; the device is sealed with two o-rings and equipped with a safety valve.

Every ACCU THERMO box includes a charger. 

Techincal features:

capacity nominal	14 Ah
charge/discharge cycles	500-700
charger input voltage	100-240 V
over pressure valve	YES
rechargeable battery	Li-Ion
total energy	125 Wh
voltage	10,95 V
max. length	200 mm
max. diameter	66mm
weight	1110 g
weight in water	415 g
max. operation depth	150 m

Operating times:

Gloves 30 W	4h 50min
Vest 55 W	2h 40min
Undersuit 110 W	1h 20min
Gloves + Vest 85 W	1h 45min
Gloves + Undersuit 140 "	1h 00min