Special Cement BL Vulcanizing Fluid

If manual inner tube and tyre repairs are to be carried out quickly and permanently, Rema Tip Top Special Cement BL accelerator solution is the right product to reliably apply repair patches (e.g. prod. code: 2274157). The vulcanizing fluid is the first choice for tubeless tyres and conventional bike tyres (casings, covers) in particular, to reliably seal punctures and minor damage thanks to its particularly high adhesion.
Even damages with open carcass fabric can be reliably sealed with the Special Cement. As quick as a wink! The formula of the Tip Top Special Cement is suitable for heat and self-vulcanization. The repair patch is applied after a short period of flashing off, then firmly pressed on and can be stressed immediately.

Details:
• Accelerator solution for sealing Rema Tip Top Rad, PN and UP patches
• Suitable to repair tubular and tubelss tyres (radial/diagonal)
• For coating the roughened inside of the tyre
• Seals and stabilises the damaged carcass
• The vulcanizing fluid can be applied directly from the tube without skin contact
• Free from CFC/aromatic compounds
• Immediately ready for use after repair
• Resealable squeeze tube

Technical details:
• For self-vulcanisation from 18 °C (65°F) to hot vulcanisation up to 150 °C (300 °F)
• Flash-off time: approx. 5 to 10 minutes (depending on ambient temperature)
• Contents: 4 g / 4.5 ml tube

In the box:
• 1 Rema Tip Top Special Cement BL accelerator solution special vulcanizing fluid


Tip:
The handy tubes also hold your tyre repair kit (prod. code 2279902) always ready for use by filling/replacing the BL accelerator solution.
The Remaxx Bike Assembly Fluid (prod. code: 2280326) or the assembly gel for on the go (prod. code: will help you mount/demount the tyre after repair, as the tyre bead slides much better over the rim flange after covered in the fluid.


Note:
High ambient temperatures accelerate drying, while processing below 18 °C significantly extends the waiting time until the product is ready for use. Protect the application area from direct sunlight and draughts.
Contains solvents of class VbF: A1 (highly flammable; keep away from sources of ignition; no smoking). Observe the safety instructions on the packaging.


Hazard and precautionary statements:
Highly flammable liquid and vapour. Causes skin irritation. Causes serious eye irritation. May cause drowsiness or dizziness. Toxic to aquatic life, with long lasting effects. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Avoid release to the environment. Dispose of contents/container in accordance with local, regional regulations.