Dissector 3C MaxxTerra DD WT TR 29" Folding Tyre

Note from the Manufacturer: Maxxis strongly advises against the use of ammonia-based sealant. Ammonia has been proven to attack the carcass and can weaken it by up to 30% after only a few months, depending on the amount used. Guidelines for Replacing E-bike Components: Before you replace components on your e-bike, please read through the guidelines for component replacement for CE-marked e-bikes/pedelecs with pedal assistance. Specifications: Application: All Mountain, Enduro Ground Conditions: Loose over Hard (5/6), Medium (6/6), Loose (5/6), Wet (1/6) Type: folding tyre Tubeless System: Tubeless Ready Technical Information: Rubber Compound: 3C MaxxTerra Carcass: 120 tpi, 2 layers Puncture Protection: DD (Double Down) Features: fast rolling MTB tyre precise cornering behaviour developed in collaboration with Troy Brosnan Models: 29x2.4 Dimensions: 29 x 2.4" ETRTO: 61-622 Air Pressure (max.): 3.4 bars Manufacturer Number: 1093 Technology: 3C MaxxTerra The Freeride version of Maxxis 3C compounds. More grip and traction than the 3C MaxxSpeed compound, with less rolling resistance and longer durability than 3C MaxxGrip. The ideal Enduro and Freeride mixture, because it combines good rolling resistance uphill with great grip on the descent. At Maxxis, the 3C tread is moulded from three different rubber compounds in one piece and not subsequently assembled from two strips. Therefore, the treads can be shaped exactly according to the requirements of the respective tyre model, thus optimising the riding characteristics. Double Down Double Down tyres are constructed just like the downhill tyres from Maxxis. However, the two carcass layers, which are reinforced with a butyl inlay, each have 120 (instead of 60) tpi. Combined with the aramid bead, this makes the tyres considerably lighter. Tubeless Ready Tubeless tyres have many advantages: you can ride with less air pressure. This gives better traction and reduces rolling resistance. And where there is no tube, the risk of punctures is reduced. Maxxis TR tyres are better prepared for mounting with sealant than other " tubeless ready" tyres. The bead of the Maxxis TR tyres is completely covered with a rubber layer like a real UST tubeless tyre. As a result, tubeless mounting is successful for all rims with standard dimensions even during the first inflation and with little liquid. Wide Trail (WT) This design optimises the tread layout and tyre shape on today's modern wider rims. Traditional tyres are designed for narrower rims and become square on wider rims, resulting in a less than optimal performance. WT tyres are optimised for an inner rim width of 35 mm, but work excellently on all rims with an inner dimension of 30 - 39 mm. Concerns tyres with a width of 2.4" and above. Contents: 1 x Maxxis Dissector 29" folding tyre