Aeotec MultiSensor 7, Z-Wave

Make your home truly smart - A small device packed with intelligence. A home is only intelligent when it can respond to events in the house in real time instead of rigid schedules. The Aeotec MultiSensor 7 with 6 sensors is now the basis of your modern smart home.

Motion sensor
Motion sensor for security and presence detection. The MultiSensor 7 can not only be used as a security system. It detects whether someone is present in the room, so you can use the MultiSensor 7 to control your heating to save energy. The sensor detects movements within a radius of 10 meters with a 120° field of view.

Temperature sensor
Motorized awnings, blinds, roller blinds, fans or thermostats - there are a lot of ways you can regulate the temperature in your living spaces using Z-Wave. The MultiSensor 7 provides you with the intelligence for this. The sensor can measure temperature in a range of -10 ~ 50 ° C (14 to 122 ° F) and send these values to your smart home gateway.

Light sensor
Automatic lighting is only as smart as the system itself. The digital light sensor of the MultiSensor 7 measures the brightness in real time. This means you can perfectly regulate your ambient lighting and control blinds, roller blinds or electric curtains.

Humidity sensor
Excessive humidity in the bathroom, kitchen or other rooms is not good for your living space. The MultiSensor 7 can measure humidity in the range from 0% to 100% and send the values to your smart home center. You can use automation to open motorized windows or switch on fans and dehumidifiers to always ensure a perfect climate in your home.

Vibration sensor
The MultiSensor 7 measures its surroundings, but also monitors itself. It integrates a seismic sensor that registers vibrations and shocks. If someone tries to remove or manipulate the multisensor, it sends a warning to your smart home system, which informs you via push notification.

UV sensor
The MultiSensor 7 measures the exact amount of ultraviolet light - the type of light that can be harmful to the human eye. Thanks to these values, which the MultiSensor 7 transmits to your smart home control center, you can automatically close electric curtains and blinds if the UV level in the room is too high.

Battery or USB power supply
The MultiSensor 7 is powered by 2 x CR123A batteries. This allows you to position yourself flexibly in the room. In battery mode, the device wakes up at a defined time interval and transmits the measurement data to the smart home center. In the scope of delivery you will also find an additional USB to micro-USB cable so that you can also operate the Multisensor 7 via mains voltage. In USB powered mode, the device is able to transmit the measured values to the smart home gateway in real time.

Specifications