Wireless SLO-10 wall switch/remote control

SLO-10 is a radio frequency controller that can control all WIRELESS M and LC series receivers. Together with WIRELESS receivers, SLO-10 completely replaces traditional wired light switches. Controlling WIRELESS receivers equipped with a dimmer is also easy.
SLO-10 is attached to a flat surface using the included screws or attachment stickers. Several controllers can be linked to control one receiver (up to 32 pcs/receiver), so the so-called Corridor and stair connections are handled in the blink of an eye. All WIRELESS controllers use unique fixed device addresses. Even such extensive solutions are built without problems and work without disturbances.

The range of the SLO-10 without obstacles dampening the connection is approx. 30 meters. The radio signal used in the control does not need line of sight between the controller and the receivers, but the connection works, for example, through a wall.
The controller has no continuous power consumption, the battery typically lasts for years.

The only wire needed in your lighting system is the supply wire to the fixture. Receivers that are permanently installed in the distribution box or connected to the socket are controlled by surface-mounted remote controls that function as light switches. The collection also includes hand-held remote controls and a remote-controlled motion detector.

Eliminating the wires of the light switches brings, in addition to the ease of installation, unprecedented modifiability and functionality for controlling the lighting. Switching on, switching off and dimming the light from several points is done in the blink of an eye by using the required number of controllers of the desired model.

There is no need for line of sight, the connection using radio frequency also works through the wall. Individual device addresses make it possible to build a large system without problems, the Wireless system works without interference and power cuts do not affect the programming of the devices.

Attach it to the wall, the side of the closet, the end of the bed, the door or even the post of the stair railing and you have a light switch in the most suitable place. The controller has no continuous power consumption, so the battery can last for years.

Can be equipped with SLO-DUAL double button set, so you can control two receivers separately with SLO-10.

Improve the lighting control of your home or property, choose a WIRELESS SOLUTION:
• No surface or hidden light switch wires
• Add or move light switches in minutes without adding a single wire
• Control the lamps connected to the socket with a light switch or remote control
• Save time and money when building and renovating

SLO-10 TECHNICAL DATA:

• Compatibility: All current Wireless receivers
• Device address: Individual, fixed device address (2 pcs.)
• Range: approx. 30 meters in unobstructed space
• Color: Glossy white
• Battery: CR2032, 3 V lithium (included in the package)
• Operating temperature: -10 to +45 C (ambient)
• Operating conditions: Dry space
• Radio frequency: 433.92 MHz
• Dimensions: 80x80x17 mm
• Electricity number: 3563030