Focusrite Scarlett Octopre -äänikortti

Focusrite Scarlett OctoPre (589,00)
- 8 kanavainen mikrofonietuaste sisäisellä A/D-muuntimella
- optinen 8-kanavainen ADAT-ulostulo
- hyväsoundiset etuset ja 24 bit/192 kHz:n muuntimet 109 db:n dynamiikka-alueella

Scarlett OctoPre features eight 2nd Generation Scarlett mic inputs - balanced line inputs too - all running through Focusrite precision 24-bit conversion at up to 192 kHz resolution with 109dB dynamic range.

Two high-headroom instrument inputs will handle high output guitar pickups and are right there on the front panel for easy access.

With high-headroom inputs and a pad on every channel, Scarlett OctoPre is ideal for tracking drums as well guitars, keyboards, vocals - and more.

Eight balanced line outputs, sourced directly from the inputs allow Scarlett OctoPre to be used in a live situation whilst capturing the recording via the digital ADAT output.

ADAT is a simple and easy way of expanding your analogue inputs. ADAT uses inexpensive "light-pipe" optical cables to carry up to eight channels of audio. Just connect the ADAT output on the OctoPre to the ADAT input on your interface, set your sample rate and clock source and you're ready to go. ADAT input is available on many Focusrite and third-party interfaces.

If you need more inputs as well as more outputs check out the Scarlett OctoPre Dynamic - everything you see here, plus eight channels of pristine D-A conversion and analogue compression on every input. It might be just what you're looking for.

- Supported Sample Rates: 44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, 176.4 kHz, 192 kHz

Microphone Inputs:

- Frequency Response: 20Hz - 20kHz +0.5/-1.5dB

- Dynamic Range: 109 dB (A-Weighted)

- THD+N: <0.001%

- Noise EIN: -127 dBu

- Maximum input level (without pad): +8 dBu

- Maximum input level (with pad): +16 dBu

- Gain Range: 50 dB

- Input Impedance: 3 kO



Line Inputs

- Frequency Response: 20Hz - 20kHz +0.5/-1.5dB

- Dynamic Range: 109 dB (A-Weighted)

- THD+N: <0.002%

- Maximum input level: +22 dBu

- Gain Range: 50 dB

- Input Impedance: 49 kO



Instrument Inputs

- Frequency Response: 20Hz - 20kHz +0.5/-1.5dB

- Dynamic Range: 108 dB (A-Weighted)

- THD+N: <0.01%

- Maximum input level: +13 dBu

- Gain Range: 50 dB

- Input Impedance: 1 MO



Line Outputs

- Maximum Output Level (0 dBFS): +16dBu @ 0dBFS, or >21dBu where ADAT output is not used

- THD+N: <0.001%

- Ouput Impedance: 136 O (Balanced)