8x1000T PoE+ @ 2xSFP, + 2SFP+10G Industrial Switch SNMP, L3, -40...+75C

PLANET IGS-5225-8P2S2X on teollisuuskäyttöön suunniteltu
12-porttinen hallittava DIN-kiskoon asennettava PoE+
kytkin laajennetulla käyttölämpötila-alueella. L3-kytkin on
varustettu 8x 10/100/1000Base-T PoE+ kupariportilla, 2x
100/1000 SFP-portilla sekä 2x 10G SFP+ portilla (100/1000 al
hteensopivat).

Tekniset tiedot
  8x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with IEEE
  2x 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto
detection
  2x 10GBASE-SR/LR SFP+ slots, backward compatible with
1000BASE-SX/LX/BX SFP
  One RJ45 console interface for basic management and setup
  Complies with IEEE 802.3at Power over Ethernet Plus/end-
span PSE
  Up to 8 IEEE 802.3af/802.3at devices powered
  Supports PoE power up to 36 watts for each PoE port
  Auto detects powered device (PD)
  Circuit protection prevents power interference between
ports
  Remote power feeding up to 100m
  PoE management features
- Total PoE power budget control
- Per port PoE function enable/disable
- PoE admin-mode control
- PoE port power feeding priority
- Per PoE port power limit
- PD classification detection
  Intelligent PoE features
- Temperature threshold control
- PoE usage threshold control
- PD alive check
- PoE schedule
  IP30 aluminum case
  DIN rail and wall-mount design
  48...56VDC, redundant power with polarity reverse protect
function
  Supports 6000V DC Ethernet ESD protection
  -40...+75C operating temperature
  2x Digital Input (DI)
  2x Digital Output (DO)
  Integrate sensors into auto alarm system
  Transfer alarm to IP network via email and SNMP trap
  Prevents packet loss with back pressure (half-duplex) and
  IEEE 802.3x pause frame flow control (full-duplex)
  High performance of Store-and-Forward architecture, and
runt/CRC filtering eliminates erroneous packets to optimize
the network bandwidth
  Storm Control support
- Broadcast/Multicast/Unicast
  Supports VLAN
- IEEE 802.1Q tagged VLAN
- Up to 255 VLANs groups, out of 4094 VLAN IDs
- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad)
- Private VLAN Edge (PVE)
- Protocol-based VLAN
- MAC-based VLAN
- Voice VLAN
  Supports Spanning Tree Protocol
- IEEE 802.1D Spanning Tree Protocol (STP)
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP)
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP),
spanning tree by VLAN
- BPDU Guard
  Supports Link Aggregation
- 802.3ad Link Aggregation Control Protocol (LACP)
- Cisco ether-channel (static trunk)
- Maximum 6 trunk groups with 4 ports per trunk group
- Up to 22Gbps bandwidth (duplex mode)
  Provides port mirror (1-to-1)
  Port mirroring to monitor the incoming or outgoing traffic
on a particular port
  Loop protection to avoid broadcast loops
  Layer 3 IP Routing Features
- Supports maximum 32 static routes and route summarization
  Ingress Shaper and Egress Rate Limit per port bandwidth
control
  8x priority queues on all switch ports
  Traffic classification
- IEEE 802.1p CoS
- IP TOS/DSCP/IP precedence
- IP TCP/UDP port number
- Typical network application
  Strict priority and Weighted Round Robin (WRR) CoS
policies
  Supports QoS and In/Out bandwidth control on each port
  Traffic-policing policies on the switch port
  DSCP remarking
  Supports IGMP snooping v1, v2 and v3
  Supports MLD snooping v1 and v2
  Querier mode support
  IGMP snooping port filtering
  MLD snooping port filtering
  MVR (Multicast VLAN Registration)
  IEEE 802.1x Port-based/MAC-based network access
authentication
  Built-in RADIUS client to cooperate with the RADIUS
servers
  TACACS+ login users access authentication
  RADIUS/TACACS+ users access authentication
  IP-based Access Control List (ACL)
  MAC-based Access Control List
  Source MAC/IP address binding
  DHCP snooping to filter distrusted DHCP messages
  Dynamic ARP Inspection discards ARP packets with invalid
MAC address to IP address binding
  IP Source Guard prevents IP spoofing attacks
  IP address access management to prevent unauthorized
intruder
  Switch Management Interfaces
- Console/Telnet Command Line Interface
- Web switch management
- SNMP v1 and v2c switch management
- SSH/SSL and SNMP v3 secure access
  Four RMON groups (history, statistics, alarms, and events)
  IPv6 IP address/NTP/DNS management
  Built-in Trivial File Transfer Protocol (TFTP) client
  BOOTP and DHCP for IP address assignment
  Firmware upload/download via HTTP/TFTP
  DHCP Relay
  DHCP Option 82
  User Privilege levels control
  Network Time Protocol (NTP)
  Link Layer Discovery Protocol (LLDP)
  SFP-DDM (Digital Diagnostic Monitor)
  Cable diagnostic technology provides the mechanism to
detect and report potential cabling issues
  Reset button for system reboot or reset to factory default
  PLANET Smart Discovery Utility for deployment management