8x10/100/1000 PoE+ 2xSFP 100/1000 -40...+75C Managed Industrial Switch, Flat

PLANET WGS-5225-P82S on teollisuuskäyttöön suunniteltu 
laajennetulla k'yttölämpötila-aluueella 
varustettu hallittava 10-porttinen Ethernet PoE+ kytkin. 
Kytkimen 8x 10/100/1000 kupariporttia on verustettu PoE+ 
virransyöttötuella. Laitteessa on lisäksi 2x 100/1000 SFP- 
porttia valokuitumoduleille. 

WGS-5225-P82S on rakenteeltaan matala-tyyppinen ("flat"), 
joten sen seinäasennus on vaivatonta. Laitteessa on myös 
DIN- sekä magneettikiinnitys mahdollisuudet, joten se 
saadaan asennettua kaikentyyppisiin koteloihin. 

Tekniset tiedot: 
• 8x 10/100/1000BASE-T Gigabit Ethernet RJ45 ports with 
IEEE 802.3at PoE+ Injector 
• 2x 100/1000BASE-X mini-GBIC/SFP slots for SFP type auto 
detection 
• Complies with IEEE 802.3at Power over Ethernet Plus/end- 
span PSE 
• Up to 8 IEEE 802.3af/802.3at devices powered 
• Supports PoE power up to 36 watts for each PoE port 
• Auto detects powered device (PD) 
• Circuit protection prevents power interference between 
ports 
• Remote power feeding up to 100m 
• PoE management features 
- Total PoE power budget control 
- Per port PoE function enable/disable 
- PoE admin-mode control 
- PoE port power feeding priority 
- Per PoE port power limit 
- PD classification detection 
• Intelligent PoE features 
- Temperature threshold control 
- PoE usage threshold control 
- PD alive check 
- PoE schedule 
• Compact size with fixed wall-mounted, magnetic wall- 
mounted or DIN-rail design 
• IP30 metal case 
• Supports -40...+75C operating temperature 
• Supports ESD 6KV DC Ethernet protection 
• Dual power input design 
• - 48...56VDC wide power input with polarity reverse 
protect function 
- 3-pin terminal block or DC jack connector 
• Prevents packet loss with back pressure (half-duplex) and 
• IEEE 802.3x pause frame flow control (full-duplex) 
• High performance of Store-and-Forward architecture, and 
runt/CRC filtering eliminates erroneous packets to optimize 
the network bandwidth 
• Storm Control support 
-Broadcast/Multicast/Unicast 
• Supports VLAN 
- IEEE 802.1Q tagged VLAN 
- Up to 255 VLANs groups, out of 4094 VLAN IDs 
- Provider Bridging (VLAN Q-in-Q) support (IEEE 802.1ad) 
- Private VLAN Edge (PVE) 
- Protocol-based VLAN 
- MAC-based VLAN 
- Voice VLAN 
• Supports Spanning Tree Protocol 
- IEEE 802.1D Spanning Tree Protocol (STP) 
- IEEE 802.1w Rapid Spanning Tree Protocol (RSTP) 
- IEEE 802.1s Multiple Spanning Tree Protocol (MSTP), 
spanning tree by VLAN 
- BPDU Guard 
• Supports Link Aggregation 
- 802.3ad Link Aggregation Control Protocol (LACP) 
- Cisco ether-channel (static trunk) 
- Maximum 2 trunk groups with 2 ports per trunk group 
- Up to 2Gbps bandwidth (duplex mode) 
• Provides port mirror (1-to-1) 
• Port mirroring to monitor the incoming or outgoing 
traffic on a particular port 
• Loop protection to avoid broadcast loops 
• Supports ERPS (Ethernet Ring Protection Switching) 
• Layer 3 IP Routing Features 
- Supports maximum 32 static routes and route summarization 
• Ingress Shaper and Egress Rate Limit per port bandwidth 
control 
• 8x priority queues on all switch ports 
• Traffic classification 
- IEEE 802.1p CoS 
- IP TOS/DSCP/IP precedence 
- IP TCP/UDP port number 
- Typical network application 
• Strict priority and Weighted Round Robin (WRR) CoS 
policies 
• Supports QoS and In/Out bandwidth control on each port 
• Traffic-policing on the switch port 
• DSCP remarking 
• Supports IGMP snooping v1, v2 and v3 
• Supports MLD snooping v1 and v2 
• Querier mode support 
• IGMP snooping port filtering 
• MLD snooping port filtering 
• MVR (Multicast VLAN Registration) 
• IEEE 802.1x Port-based/MAC-based network access 
authentication 
• Built-in RADIUS client to cooperate with the RADIUS 
servers 
• TACACS+ login users access authentication 
• RADIUS/TACACS+ users access authentication 
• IP-based Access Control List (ACL) 
• MAC-based Access Control List 
• Source MAC/IP address binding 
• DHCP snooping to filter distrusted DHCP messages 
• Dynamic ARP Inspection discards ARP packets with invalid 
• MAC address to IP address binding 
• IP Source Guard prevents IP spoofing attacks 
• IP address access management to prevent unauthorized 
intruder 
• Switch Management Interfaces 
- Telnet Command Line Interface 
- Web switch management 
- SNMP v1 and v2c switch management 
- SSH/SSL and SNMP v3 secure access 
• Four RMON groups (history, statistics, alarms, and 
events) 
• IPv6 IP address/NTP/DNS management 
• Built-in Trivial File Transfer Protocol (TFTP) client 
• BOOTP and DHCP for IP address assignment 
• Firmware upload/download via HTTP/TFTP 
• DHCP Relay and DHCP Option 82 
• User Privilege levels control 
• Network Time Protocol (NTP) 
• Link Layer Discovery Protocol (LLDP) 
• SFP-DDM (Digital Diagnostic Monitor) 
• Cable diagnostic technology provides the mechanism to 
detect and report potential cabling issues 
• Reset button for system reboot or reset to factory 
default 
• PLANET Smart Discovery Utility for deployment management