DELOCK - Dual Docking Station for 2 x SATA HDD / SSD

This docking station by Delock enables an external connection of up to two 2.5″ or 3.5″ SATA HDDs or SSDs through the USB interface. This solution does not require an external enclosure since the drive can be plugged into the docking station directly.

The clone function enables to copy the content of one HDD to another without using a PC. No connection to the computer is required for the erase function. Selectively one drive or two drives can be deleted at the same time.

• Connectors: 1 x USB 5 Gbps Type-B female 2 x SATA 6 Gb/s 22 pin receptacle 1 x DC jack
• Chipset: Asmedia ASM1156
• Function key: 1 x Clone button 1 x Erase button 1 x On / Off switch
• Erase procedure: overwrite the entire memory with “0”
• For 2.5″ and 3.5″ SATA HDD / SSD
• Suitable for all SATA HDDs up to SATA 6 Gb/s
• Data transfer rate up to 5 Gbps
• LED indicator for power, access and copy / erase status
• Dimensions (LxWxH): ca. 153 x 110 x 62 mm
• Plug & Play

Power supply specification

Wall power supply
Input: AC 100 ~ 240 V / 50 ~ 60 Hz / 1.5 A
Output: 12.0 V / 3.0 A
Ground outside, plus inside
Dimensions:
inside: ø ca. 2.1 mm
outside: ø ca. 5.5 mm
length: ca. 10 mm

System requirements

Chrome OS
Linux Kernel 5.13 or above
Mac OS 12.4 or above
Windows 8.1/8.1-64/10/10-64/11
PC or laptop with a free USB Type-A port

Package content

Docking station
Cable USB Type-A male to Type-B male, length ca. 80 cm
External power supply 12.0 V / 3.0 A
User manual

Package

Retail Box

Huom! Tekniset tiedot tarjoaa kolmas osapuoli. Data-Systems ei vastaa virheellisistä tiedoista.