MSI RTX4090 SUPRIM LIQUID X 24GB GDDR6X HDMI 3xDP + NVIDIA Bundle: Star Wars Outlaws

CHANGE THE GAME
Find prestige from SUPRIM LIQUID with its high-quality materials, bold style, and evolutionary hybrid thermal design.

SUPRIM LIQUID bears an exquisite exterior design that reflects its performance capabilities.
High-quality materials and manufacturing are exemplified with an aluminum metal cover
Angle-beveled edges with light-gold colored polish
Octagon-shaped fan cutout and an illuminated chevron next to the fan

EXQUISITE DESIGN
High-quality materials and manufacturing are exemplified with bevel cut edges, geometric lines, light-gold colored angles, and a fan frame accentuates an aluminum metal cover.

SUPRIM LOGO STORY
SUPRIM and its logo concept are inspired by diamond crystals and geometry to represent the high-quality materials and construction of SUPRIM graphics cards.

MICRO-FIN COPPER BASE
The four sides of the copper base feature a thicker surface, allowing for improved heat dissipation on the VRAM and the GPU.

ZERO FROZR
The fans completely stop when temperatures are relatively low, reducing the noise significantly when active cooling is not needed. The fans will automatically start spinning again when the heat is on during gaming

TORX FAN 5.0
Design improvements to TORX FAN 5.0 result in +23% airflow compared to an axial fan and +10% airflow compared to TORX FAN 4.0.

Ring arcs link sets of three fan blades that focuses airflow into the heatsink.
Blades tilt 22 degrees to maintain high-pressure airflow even at slower rotational speeds.
The trailing end of each ring arc folds inward to reduce turbulence and drag.

Bulging notches under the cowl reduce recirculation, thus further improving airflow stability and reducing some noise.
A fan cowl extends a bit beyond the general enclosure to lengthen the wind’s passageway, allowing airflow to stabilize and move smoother through the fans.

ALUMINUM RADIATOR
A 240 mm black aluminum radiator dissipates heat out of the liquid stream and allows SUPRIM LIQUID to sustain intense performance.

RADIATOR FAN
MSI MEG SILENT GALE P12
The anti-vibration gaskets sitting on the four corners of the fan are used to reduce rattling caused by the vibration.

GOT YOUR BACK
Fine details elevate the backplate such as its brushed metal finish and the beveled edges polished with a light-gold color. Thermal pads beneath the sturdy plate provide additional cooling to the graphics card.

HARDENING THE DETAILS
The fully custom PCB has been built up with an advanced circuit layout and outfitted with premium componentry.