Radial Catapult Mini TRS audio snake

Radial Engineering Catapult Mini TRS audio snake
- 4-kanavainen Cat5/TRS audiosiirtäjä
- Laitteen avulla neljä analogikanavaa voidaan siirtää Cat5/6 Ethernet kaapelin kautta
- Passiivinen operointi, siirtää signaalin analogisena eikä muunna digitaaliseksi
- Ei vaikuta signaaliin heikentävästi tai värittävästi
- Kompakti koko, jämäkkä rakenne
- Cat5/6
- Liitännät: 4 x 6.3mm TRS stereoplugi, RJ45 (Ethercon)
- Monikäyttöinen ja yhteensopiva vallalla olevan kaapeli-infrastruktuurin kanssa
- 60 cm viuhka
- Pulverimaalattu teräskotelo
- Yhteensopiva esim. muiden Radial Catapult Mini -sarjan laitteiden kanssa (TX ja RX).

The Catapult Mini is a compact passive audio snake that allows you to send four channels of analog audio over standard Cat 5 or Cat 6 Ethernet cable.

The Catapult Mini System works like a typical four-channel analog audio snake; they allow you to send mic or line-level signals from one location to another without signal loss, noise, or interference, and without any digital audio conversion needed. What makes the Catapult system unique is that it utilizes Cat 5 Ethernet cable, which is widely available, lightweight, and economical. Simply connect a shielded Cat 5 cable between any two Catapult modules and they will use the analog conductors in the cable to deliver four balanced audio lines to any destination.

Catapult modules require no power to operate, and since they keep the signal in the analog realm, no digital conversion is necessary. Straight-wire connection from the XLRs to the RJ45 connector on a Cat 5 cable ensures that your audio passes through without coloration or distortion.

As many buildings are already pre-wired for Cat 5, you can take advantage of this to transmit audio between distant rooms without the need to install or supply new cabling. This eliminates the need for bulky and expensive multi-channel audio cable, and allows contractors to benefit from installed network cable and easily connect from one room to another.