Rotatable Kitchen Faucet With Pull-out Shower

Description Pull-out Hose: The nylon braided hose can be bent in any direction, allowing you to use it without restriction. One-piece Handle: It is sturdy and thus less likely to break during use. Honeycomb Frother: The honeycomb design makes the water more soft and dense, thus giving you a better skin-friendly experience. Thickened Base: The enlarged and thickened base (2in) provides more stability and support for the product, thus making it safer to use. How to Install 1. Install the faucet into the reserved position. 2. Install the fixings in order. 3. Unscrew the gravity ball screw, snap it onto the hose and tighten it. Application It is an essential accessory for homes, kitchens, bathrooms, restaurants, laundromats, offices, hotels, bars, cafes, restaurants, etc. It is ideally suited for single or double sinks. Specification Model: K8011 Material: Stainless Steel, Nylon Color: White Type: Pull-out Handle Type: Lever Water Inlet: Underwater Mounting: Desk Type Installation: Single Hole Process: Baking Paint, Electroplating, Brushing Water Outlet: Intensive Shower Water, Column Bubble Water Assembly Required: Yes Number of Handles: 1 Nominal Pressure: 1.0MPa Working Temperature: 0-90/32-194 Inlet Pipe Specification: G3/8 Inlet Pipe Length: About 80cm/31.5in Pullable Range: About 50cm/19.69in Gross Weight: 1.8kg/ 3.97 lbs Package Size: 56.5*25.5*6 cm/22.24*10.04*2.36 in Outlet Length: 23cm/9in Product Size(W*H): 26*39cm/10.23*15.35in Base Diameter: 5cm/2in Package Included 1 * Kitchen Tap with Extendible Spray 1 * Gravity Ball 2 * Hot and Cold Water Hoses 1 * English Manual All Accessories for Installation Notes 1. Please note that this item only supports the lower influent way and it should be installed on the countertop or sink, not on the wall or water pipe for the lateral influent way. Please test the water first after installation: check for leaks; run the water first, then the electricity! 2. Please ensure that water is connected before electricity when you install this product. Please install the product vertically instead of tilting or upside down. 3. The outlet temperature is determined by: the temperature of the incoming water; the power rating of the unit; and the speed at which the water flows through the unit. 4. Please do not install this product outdoors. This appliance is intended for indoor home use and drinking water only. 5. Some residual water may remain inside the product. This is very normal and is the result of careful safety testing of each product before packaging. 6. Please be sure to unplug and disconnect the water and power when the temperature falls below 32 or when the water freezes. 7. Please read the operating manual completely before use. And pay particular attention to the safety instructions included. 8. Please allow the slight color difference caused by the shooting light and the 1-3 cm error due to manual measurement, and make sure you do not mind before ordering.