Wiser PowerTag Energy - energy meter PT R9 3P+N Flex

PowerTag Energy is a wirelessly communicating energy sensor designed for energy management in both new and renovated buildings. Together with the Wiser hub, PowerTag Energy monitors the real-time energy consumption of your home, up to 63A. Installation in the electrical panel can be done in minutes.

When wirelessly connected to the Wiser system, PowerTag enables additional features such as electricity market price monitoring and automation (available Q3/2023).

PowerTag measurements can also be used as Wiser automation conditions:
-Load status (on/off)
-Instantaneous total power (W)
-Daily consumption (over X kWh)
-Monthly consumption (over X kWh)

Frequency: 50Hz
Voltage (3 phase): 380...415 V AC
Maximum current: 63A
Operating temperature: -25°C...60°C
Overvoltage protection (IEC 61010-1): Class III
Measurement category (IEC 61010-2-30): Class III
Measurement accuracy (IEC 61557-12): Class 1
Protection class: IP20, IK05
Radio frequency: 2.4GHz...2.4835GHz
Shortest communication interval: 5s

Full use of Schneider Electric's Wiser system requires a hub (CCT501901, Matter-certified), the Wiser by SE smartphone app, a user account, and an internet connection. Use of the system is free of charge. The device is intended for indoor use.

It is recommended to install one PowerTag in the application, which appears as "Electrical Network" - a meter of the total household consumption. Other PowerTags can be added under this to measure other groups.