SteyrTek 25mm 5x130/5x112 jaonmuutosadapteri

• SteyrTek Adapter (circulation piece)
• Thickness: 1 inch = 25.4 mm
• Bolt distribution: 5x130/5x112
• Center hole: Center hole inside 71.6 mm
• Outside collar outer dimension (shaft replacement) 66.5 mm
• Outer diameter 176 mm
• 1 pc in the package

If you want to ensure that the adapter is centered in relation to the car, use an adapter. Choose an adapter where the outer diameter is the inner diameter of this adapter, i.e. 71.6, and the inner diameter is the axle thickness of your car.

With this car, you fit rims with a 5x112 ratio to a car with a 5x130 ratio. At the same time, you bring the rim 25 mm outwards in the car, i.e. reduce the ET. As shown in the picture, the stud bolts and nuts (12 mm x 1.5 pitch) with which the rim is attached to the spacer are included in the delivery. The bolts for attaching the spacer to the hub of the car are not included in the shipment. Use car bolts. In a thin spacer, you may have to lower the head of the bolt or get bolts with a lower base.

Top class aluminum from SteyrTek.

Show or racing use only, not approved for road use.