Power Cleaner 0,5 l

Ready-to-use efficient bio-solvent for the removal of grease, dirt, asphalt residues and other difficult dirt in vehicle maintenance and industry. Suitable as a pre-solvent before the actual washing of the car.

• Also dissolves protective waxes, locksmith and fuel residues, adhesive and taping residues.
• The product can be rinsed with water after the exposure time
• A safe and environmentally friendly alternative to harsh hydrocarbon solvents

Instructions for use:
Solvent ready for spraying. Ready to use ready-to-use solvent for solvent application. Rinse with plenty of water or add a pre-wash solution, followed by a rinse with plenty of water.

Do not allow to dry on the surfaces to be washed. Viton sealant is recommended for pump sprayers and pressure washers. See label or safety data sheet for instructions on safe use. Store closed at +5...+30 °C.

Ensure adequate ventilation. The product is readily biodegradable.

Technical data:
Form and colour: Clear.
pH: 11,4
Relative density: 0,87
Flash point (ASTM D93): > +60C

Warning labels EC 1272/2008 (CLP)

Note word Warning
Hazard statements
H319 Very irritating to eyes
H315 Irritating to skin
Safety phrases
P264 Wash hands thoroughly after handling
P280 Wear personal protective equipment/mask
P305+P351+P338 IF THE CHEMICAL GETS INTO EYES: Rinse thoroughly with water for several minutes. Rinse for several minutes after contact with water. If possible, rinse with plenty of water.
P337+P313 If eye irritation persists: seek medical advice.