FOSTEX 6301NX - 4" Active Monitor - XLR/1/4” TS

MAIN FEATURES 20W D-class power amplifier for higher output level and less power consumption with no heat sink Dedicated 4-inch full range driver for clear audio reproductionTraditional rugged enclosure of aluminum die-cast with the physically identical height and width to the current B-series Flat panel design to avoid inadvertent power-off or level changeAuto Stand-by mode (compliant to ErP directive) for energy saving Detachable IEC type power inlet with multi-voltage power handling Newly designed mounting bracket (EB-6301) for wall mounting with variable angle adjustments TECHNICAL SPECIFICATION Enclosure type: closedUnit: 4” full rangeFrequency response: 70 Hz – 15k HzSound Pressure Level: 85dB / W (1m)Maximum SPL: 98dBInput connector: XLR-3-31 (IEC 60958 AES/EBU)Input Impedance: 10k ohm or moreInput connector: 1/4” TS (unbalanced)Input Impedance: 10k ohm or moreRated output: 20WDistortion (T.H.D.): 0.05% (1kHz / 1W output)Residual Noise: -70dBV or less (NB/NE/NX). -65dBV (DT)Input Sensitivity: 1/4” TS: -14dBV (0.2Vr.m.s.)Auto Stand-by: active after approx. 25 min. of continuous input lower than the threshold levelDimensions: 120 (W) x 189 (H) x 120 (D) mmWeight: 2.2kgsPower Requirement: AC 100 – 240V (50/60Hz)Power Consumption: 10W (less than 0.5W in stand-by mode) GENERALDimensions:    120 (W) x 189 (H) x 120 (D) mmWeight:  2.3kgsPower Requirement:    AC 100 – 240V (50/60Hz)Power Consumption:    10W (less than 0.5W in stand-by mode)    Owners Manual 6301ND/NX/NE/NB 6301 & EB-6301 Dimensions Drawing