AKG A48V phantom adpateri B18 virtalähteelle

AKG A48V phantom adpateri B18 virtalähteelle
- 9V patterilla B18 antaa 48V phantom-jänniteen

AKG's A 48 V Phantom Power Adapter for the B 18 Battery Power Supply is a converter that turns your 18V power accessory into a 48V phantom power source for condenser mics. It can power many phantom-powered mics that perform at higher voltages and lower impedances, including most of AKG's mics. Notable exceptions are high-impedance mics like AKG's C 414 and C 480 B.

The adapter replaces one of two 9V batteries in the B 18, and lowers overall impedance to output 48V from a single 9V battery.

Get More Volts For Mobile Mics
By lowering impedance, the A 48 V can push a higher output voltage to your wireless mics than the B 18 will supply while using only a single 9V battery as input. It's perfect for voltage-hungry condensers that aren't picky about impedance level.
Improved Dynamic Range
Powering mics on batteries often results in a lower dynamic level than feeding mics from an AC-powered mixer (i.e., a mic's dynamic range can drop from 112 dB to 98 dB). If you want to drive your signals hotter, use the A 48 V to step up the voltage.
Compatible with:

Phantom-Powered Microphones
The A 48 V and B 18 together can power any condenser mic with standard XLR connectors that accepts low-impedance 48V input. This spans most of AKG's mics including the MicroMic III Series and the C 430 MicroMic. Hungry high-impedance mics that won't work with the Adapter include AKG's C 414 models and the C 480 B.


Input Connectors Uses the 3-pin XLR connectors found on the B 18
Output Connectors Uses the 3-pin XLR connectors found on the B 18
Adapter Converts the Typical 18V Output of the B 18 to 48V
Battery 1 x 9V
Power 9V Input, 48V Output
Dimensions 0.94 x 1.88 x 0.56" (2.39 x 4.78 x 1.42 cm)