DELOCK - 3.5? Mobile Rack for 1 x 2.5? U.2 NVMe SSD or SATA/SAS, HDD/SSD

This solid metal mobile rack by Delock can be installed into a free 3.5″ bay of a PC.U.2 SFF-8639 interface also suitable for SATA and SAS A 2.5″ U.2 SSD can be mounted inThe tray and slid intoThe rack.A SATA or SAS HDD or SSD can also be installed.

• Connectors: internal: 1 x U.2 SFF-8639 female external: 1 x U.2 SFF-8639 male
• Suitable for 2.5″ U.2 / SATA / SAS HDD / SSD: HDD height up to 15 mm supports 5 V SATA / SAS HDD / SSD supports 12 V SAS HDD / SSD
• Data transfer rate: SATA up to 6 Gb/s SAS up to 12 Gb/s NVMe up to 32 Gb/s
• 1 x On / Off switch
• Key lock
• Hot Swap

This solid metal mobile rack by Delock can be installed into a free 3.5″ bay of a PC.U.2 SFF-8639 interface also suitable for SATA and SAS A 2.5″ U.2 SSD can be mounted inThe tray and slid intoThe rack.A SATA or SAS HDD or SSD can also be installed. Depending on which memory type is installed,The appropriate cable must be connected toThe backside and connected toThe system. This is possible becauseThe SFF-8639 port allowsThe connection of a SAS 29 pin or SATA cable.The hot swap function allowsThe exchange ofThe hard disk drive during operation.Tray with key lockThe mobile rack is equipped with a key lock to prevent unauthorised access.

Huom! Tekniset tiedot tarjoaa kolmas osapuoli. Data-Systems ei vastaa virheellisistä tiedoista.