Nedis NWTG100YE cable tester

This sound generator with an amplifier probe detects and traces the wires or cables of the group without damaging the insulation. The tool is suitable for network installation and object inspection. The sound generator emits a single signal or multiple frequency signals and has two individual test cartridges and a 4-pin test connection. When you use the sound generator with the wires attached and hidden in the wall or there is an obstacle in their way, the sound signal sent by the central unit is easy to test with a measuring head. This mass tester can be used to test cable grounding, cable faults, circuit polarity, network or modular cable operating voltage. The route of the circuit and the exact positions can be estimated based on the indicator light and the beep.

• For easy testing of the cable signal
• Volume control
• Includes a headphone jack

Package contents

• Amplifier probe
• Sound generator
• 2x battery, 9 V
• Storage bag
• Quick start guide




Features:
• The amplifier probe is designed to identify and trace wires or cables within a group without damaging the insulation
• Works with any tone generator to identify wires
• Volume control for increased sensitivity and adjustable to suit work environment
• Recessed On/Off button prevents battery drain
• It can be powered with only one 9V battery and the device has a long battery life (approx. 100 hours of use)
• A plug receptacle is provided for use with a headset or headphone
• Red and black test leads are provided, and it has a standard conductor modular cord and plug
• A 3-position toggle switch controls the modes of operation plus a 3-colored LED is provided for the line polarity, continuity and voltage testing
• A tone selector switch, located inside the test set is provided for choosing either a single solid tone or dual alternating tone (CAUTION: Do'nt connect to an Active AC circuit exceeding 24V in this mode)