Schneider Electric Zelio socket with push-in spring clamps for RXG relays with 2 contact sets

Zelio RXG are a series of plug-in relays with a width of only 16 mm and robust faston connectors which is compatible with similar relays from other vendors. The relays are available with 1 C/O contact with 10A or 2 C/O contacts with 5A maximum load and it is possible to get them with or without lockable testbutton and status LED.A protection module (diode, varistor or RC-circuit) can be inserted into the socket if needed.The sockets RGZExxxx has separate terminals for supply and load which simplify troubleshooting and mounting of the relays.RGZE08P is a socket with separate push-in terminals that fits with RXG relays with 2 C/O contacts.The socket has a width of 16 mm and protection modules can be inserted directly next to the supply terminals.The integrated holding clip protect the relay from falling out when inserted into the socket.The socket has push-in terminals for easy wiring without the use of any tool and optimum protection against vibrations.The RGZE08P fits all RXG2xxx plug-in relays with 2 C/O contacts.Additional marking of the socket can be done with the RSZL300 legend which is easily mounted on the sockets.Each terminal have room for 2 wires with a wire size between 0,5..1,5 mm2 and there is a integrated test point built into the socket.For connecting more than one socket to the same supply, the RSZS02 jumper is inserted next to the A2 terminal and it works across the ranges.The socket is marked with both NEMA and IEC markings.