Narvi Inari Plus puukiuas

Narvi Inari Plus
The Narvi Inari stove is now available as a new accessory with a net sheath for the lower part. With the new accessory, the amount of stones can be increased and the stove stones stand out impressively from the entire height.

Narvi Inari combines attractiveness with the durable quality of the Narvi stove. The heater gives soft baths thanks to the large amount of stones.

Narvi Inari Plus = Narvi Luosto body + upper mesh sheath + lower mesh sheath

Technical information:

• Sauna room size: 8–18m³
• Height 77cm
• Diameter 55cm
• Total weight / Number of stones: 151 kg / 90 kg
• Number/size of stones: 4 pcs (20kg) 5-10cm stove stones and 1 pc (20kg) 10-15cm stove stones
• Outer diameter of the connecting pipe: 119 mm
• Height of the bottom edge of the connection pipe from the floor: 84 cm*)
• Outer shell: Black steel mesh
• Good firewood is normal, split wood with a diameter of approx. 5 cm, a length of approx. 33 cm and a weight of approx. 0.5 kg.

• Protective distances:
  • 300 mm for the sides
  • Forward 500 mm
  • Up 1280 mm
  • Back 350 mm

• The robust 10mm thick firebox roof makes the stove reliable and long-lasting
• Low carbon dioxide emissions (0.11%) and good efficiency (69%)
• Key ticket product

*) is connected from the top of the stove to the flue with a 90° connecting flue. The connection to the stove from the back can be made by cutting three steel wires from the stone basket, e.g. with a hacksaw. In this case, the connection height to the bottom edge of the connecting flue is 55 cm from the floor, connected from the top of the stove to the flue with a 90° connecting flue. The connection to the stove from the back can be made by cutting three steel wires from the stone basket, e.g. with a hacksaw.