Nordtronic Uni install dimmer w/o light source matt white round

Uni Install Dimmer has a built-in dimmer (120W), which is designed for Nordtronic’s Uni Install. The problems with dimming are therefore in the past. It is possible to dim 23 Uni Install with a dimmer, using a retractive switch. And it is possible to dim the light in the kitchen or family room by switches at all the doors or by IHC.There is a little potentiometer in the product, by which you can adjust the light level. This function makes it possible to adjust settings for light sources produced by other manufactures.The dipswitch on the side, is a memory switch, allows the dimmer to remember the last settings for dimming (light level memory function).Uni Install Dimmer is easy and quick to install directly in the insulation with screws or springs. The mounting depth is only 63 mm. Uni Install has screwless push-in connector box, and can be mounted with cables or 16mm flex tubes.Uni Install Dimmer is designed and developed in Denmark and it is available with different front designs and light sources, therefore it is easy to find a product variant that meets the user&aposs needs and requirements.Uni Install Dimmer is available both as indoor and outdoor model.• Approved for installation directly in the insulation and flammablematerials.• Low mounting depth• Built-in LED dimmer (trailing edge)• Max. load dimmer: 120W• Adjustable min. setting for dimming• Memory function for dimming• Quick and easy mounting• Mounting with screws or adjustable springs• Screwless terminal block in the connector box• Possibility of mounting with cable or 16 mm flex tube• Adjustable springs for ceiling thickness up to 44 mm• Adjustable screws for ceiling thickness up to 35 mm• Designed and developed in Denmark